four_oclocker_2.2 wrote: Thu Dec 19, 2024 4:23 pm Got a few more on the block!

Rickenbacker 360

WHOLE bunch of upgrades here. Ric HB-1 in the bridge position, Mastery Bridge, refret done recently by Geoff Benge. Check the photos/description for more notes on the wear.

$1600 (plus shipping) for buds.

Also...I may be selling the Jury bass detailed here. WONDERFUL bass, but I've gotta pay for some other gear. $700 (plus shipping)? Would much prefer to keep this in the FAMILY.

SLIDE INTO THE DMs!

Which bass is it, #6?

ChudFusk wrote: Thu Dec 19, 2024 6:37 pm
Which bass is it, #6?

Actually earlier - #4!

four_oclocker_2.2 wrote: Thu Dec 19, 2024 7:09 pm

ChudFusk wrote: Thu Dec 19, 2024 6:37 pm
Which bass is it, #6?

Actually earlier - #4!

Oh man I almost wish it was #6 because I like 4 better and I really can't financially entertain the notion. Arg!!!

Anyone out there looking for a great "My first 3-ply Ludwig" type of kit?

I've got a 60s 13/16/22 in red sparkle kit I'm gonna be listing soon. Picked it up from the Chicago Drum Show last year but I need to make some space. Great sounding kit, some hardware has been swapped with some INDe pieces. White interiors, though 1 or 2 of the drums were re-finished it white (looks super clean, done professionally before I got the kit.)

$1100 OBO

Pickup in Chicago or Kalamazoo, not gonna ship. DM if interested and if you want pics!

SOLD. Thank You.
Hello Friends,

We are quietly looking for a buyer for our Neotek Elan.

Our Neotek Elan is a ’92 metal frame made in Chicago 32 channel model with a left hand patch bay and built in stand.

We’ve owned and maintained the console since we got it in 1999.

Console package includes a complete wiring harness that would go to just about anything you’d want to hook (Tape machine/convertors, outboard gear, 2 track recorder, 2 sets of speakers etc). We added rows and maxed out the patch bay. The power supply was recently rebuilt by Roger Deller at Electric Lady. The console also has a new bolster. All the wiring comes in from below the console. Most is on Elco connectors, the rest is directly wired directly to the bay.
It’s had an op amp mod done to the 2 bus by Pro Audio & Design in Boston. Faders 31 and 32 are not working well but the channel returns are. Most everything else is in very good shape. Also included is the full manual.

The console is 76” long and is not too difficult to transport. The legs come off for moving. Removing the channel modules is not needed to move the console.

Please let me know if you know anybody who might be interested in our rig. We’ve had it since ’99 and it’s
been really solid performer for for us. There are photos of the console at www.cowboytechnical.com and at our Instagram page.

The console is in Brooklyn would be available sometime late March/April of this year.

$8.5 k all in.

Thank you.

Hi all,

I'm selling a couple of amps if you're interested. I'm in Toronto, Canada, so please factor int'l shipping into the equation.

Vox V125 Lead
$PENDING + shipping Garnet Enforcer:
$SOLD + shipping Both amps are in good, working condition. Enforcer has brand new power tubes and was recently serviced. The vox had a full checkup a few years ago and has been fine since then.

The grille on top of the Vox is pushed in from storage, it just needs to be tacked up.
The front panel of the Enforcer is missing, it was like that when I got it and I've never bothered to fix it.

Thanks, holler if you have questions.

mdc wrote: Thu Jan 23, 2025 1:47 pm Hi all,

I'm selling a couple of amps if you're interested. I'm in Toronto, Canada, so please factor int'l shipping into the equation.

Vox V125 Lead
$525USD + shipping

Garnet Enforcer:
$375USD + shipping

Both amps are in good, working condition. Enforcer has brand new power tubes and was recently serviced. The vox had a full checkup a few years ago and has been fine since then.

The grille on top of the Vox is pushed in from storage, it just needs to be tacked up.
The front panel of the Enforcer is missing, it was like that when I got it and I've never bothered to fix it.

Thanks, holler if you have questions.

Damn, how’s that Garner Enforcer? I’ve never come across one

Yeah, I can't find another pic of an Enforcer that looks like that. The panel/controls looks identical to a Jammer combo.

Is there a nameplate on the back, with the model number stamped in it?

IIRC the jammer and enforcer were basically the same amp with the jammer being set up for 6L6s and the enforcer using 6CA7/EL34. Gar being Gar, there are a bunch of variations between batches/orders and both amps are from the era where he was cutting a lot of corners.

And yep, it was stamped G200R on the tag - I believe that's the code for an enforcer.