Here's the Rusty Rack proposal so far... Do you think we need to add a bypass feature? Does a rack preamp need this? It obviously adds a design challenge. Most likely only the unbalanced i/o would have bypass... with the balanced section remaining on line. Let us know so we can better service this fine community 1U full rackPower:AC Mains connector that powers a switching power supply module to generate +/-15VDC. AC Mains range = 100VAC ~ 240VAC.Controls:KnobsINPUT GAIN “ same as INPUT GAIN knob on Rusty BoxBOOST “ new knob that sets boost gainMID “ same as MID on Rusty BoxBASS “ same as BASS on Rusty BoxTREBLE “ same as TREBLE on Rusty BoxVOL “ same as VOL on Rusty Box, this is a master volume controlPossible additions: Sweepable MID parametric EQ:MID Frequency knobMID Boost/Cut knobMID BandwidthSwitchesINPUT HI/LO toggle switch “ same as HI/LO on Rusty BoxBOOST on/off toggle switch “ since this function can also be enabled/disabled with an external footswitch, the local BOOST switch must be in the OFF position for the external footswitch to change the state of BOOST. When the local toggle switch is in the ON position, BOOST is always enabled.Power rocker switch “ either slim or full-size Rocker switchSweepable MID EQ on/off toggle switchPassive EQ type toggle switch “ switches the passive EQ between Rusty EQ and Boxidizer EQ.IndicatorsPOWER LEDBOOST on LEDHI/LO hi LEDMID EQ on LEDI/OFront PanelInput: 1/4" Instrument (Unbal) “ same as on Rusty BoxBack PanelInput: 1/4" Instrument (Unbal) “ mirrors input on front panelInput: XLR Balanced (Bal)Output: 1/4" Line (Unbal) “ same as on Rusty BoxOutput: 1/4" Main (Bal/Unbal) “ same as on Rusty BoxOutput: XLR Balanced Main (Bal) “ mirror Main Output Output: XLR Balanced DI (Bal) “ this output is before the master VOL knobControl: 1/4 footswitch for external momentary footswitch control over the Boost function. This jack accepts one footswitch on the TIP.AC Mains Power Connector w/ built-in fuse

Balanced XLR DI output pre-master volume knob? Hell yeah! Foot switch and volume control for the boost? Whoop whoop I might actually start using the boost. Sweepable mid? Excellent! Optional Boxidizer EQ? Um, sure I guess, I don't know.Personally I wouldn't use a bypass.

I'm definitely in the target market for a Rusty Rack.

I love the Boxidizer eq! The whole thing seems rad!

Are you guys planning to go after the small studio buyers? You might attract more of them with MIDI control, but then, that might be cost-prohibitive to implement.

Hey David: I just saw on facebook that the new rusty box is available for purchase; I've decided to buy one again as an amp replacement (a vintage ampeg that is too heavy for my old back) so I'm curious about the rack version and was wondering if you had a sense of the pricing/timing on this version.

An effects loop would be a great addition.

Bishopdante, what I meant was if they were going for the DAW automation and synth folks, not the virtual guitar amp users. Think Elektron Analog Heat, not Avid Eleven.

Those mid controls would be great. Bandwidth is awesome but if it's much easier to leave that out it's not a dealbreaker. Is the color scheme going to be the same as the pedal?