who is using the currently available RMG tape stock?
speak!
rmg whose usin
2Where's MTAR? I know he's used some of it.
I want to try the new 911, 'cause the old Emtec 911 was the bomb. Haven't bought any though. Don't know if it's officially available in 2" yet...
I want to try the new 911, 'cause the old Emtec 911 was the bomb. Haven't bought any though. Don't know if it's officially available in 2" yet...
rmg whose usin
3yup usrecordingmedia has the 2" rmg 900 and 911
WHOOT
WHOOT
satisfactoryatburntsienna dt com
rmg whose usin
4first session on the rmg900 stock yesterday.
ran like a champ, sounds great
no wierd deposits like w/ the test reel back in june.
so okay!
ran like a champ, sounds great
no wierd deposits like w/ the test reel back in june.
so okay!
satisfactoryatburntsienna dt com
rmg whose usin
5Bought a case of the 1/2" 900, which I will use tomorrow. I look forward to burning through the rest of my 2" GP9 so's I can try out the RMG 2" 900.
rmg whose usin
6Greg is:
http://www.electrical.com/phpBB2/viewto ... &start=200
I'm using 1/2 SM900 this weekend on the Otari 5050 8-track. It sounds great, very quiet.
It smells weird, though.
Charles
http://www.electrical.com/phpBB2/viewto ... &start=200
I'm using 1/2 SM900 this weekend on the Otari 5050 8-track. It sounds great, very quiet.
It smells weird, though.
Charles
rmg whose usin
7CRAP.
i know EA had some problems with the beta testing stuff they got too, similar to mine.
I have some of the 1/4" 900. when trying to set bias and hi freq eq i noticed that the high the level started dropping, and it kept getting worse as the tape kept moving. I cleaned the heads and tried again and it was fine, until about 30 seconds it started happening again.
So I suspected it was leaving something on my heads because cause of the drop in high frequency. So I shuttled the tape from head to tail while holding my finger against the insde of the tape. Sure enough there was brown residue and a shiny substance left on my finger.
I tried another reel of it that I had, and it wasn't as bad but still unstable and still shedding.
Anyhow, I threw up some AMPEX 499 I had laying around and worked like a charm.
So as far as im concerned, it's crap. I may have had a bad batch I guess.
mike
i know EA had some problems with the beta testing stuff they got too, similar to mine.
I have some of the 1/4" 900. when trying to set bias and hi freq eq i noticed that the high the level started dropping, and it kept getting worse as the tape kept moving. I cleaned the heads and tried again and it was fine, until about 30 seconds it started happening again.
So I suspected it was leaving something on my heads because cause of the drop in high frequency. So I shuttled the tape from head to tail while holding my finger against the insde of the tape. Sure enough there was brown residue and a shiny substance left on my finger.
I tried another reel of it that I had, and it wasn't as bad but still unstable and still shedding.
Anyhow, I threw up some AMPEX 499 I had laying around and worked like a charm.
So as far as im concerned, it's crap. I may have had a bad batch I guess.
mike
rmg whose usin
8Had a fine experience w/ the 1/2" 900 on my Studer A80RC. Thinking about trying some 911 next, though. No shedding problems.
What's the batch number on your reels, Mike?
What's the batch number on your reels, Mike?
rmg whose usin
9Did anyone still have problems with the new 900 tapes?
I tried to order some quantegy today and it seems that it's not available anymore in Germany.
So the RMG stuff better be good.
I tried to order some quantegy today and it seems that it's not available anymore in Germany.
So the RMG stuff better be good.
rmg whose usin
10max wrote:I tried to order some quantegy today and it seems that it's not available anymore in Germany. .
It isn't available anywhere now/\
The latest reels of 900 have been good for me.
Greg Norman FG