GReg-Electrical Tech Journal

greg_Archive

GReg-Electrical Tech Journal

401 by greg_Archive

cgarges wrote:Hey Greg,

Let me know how those Furman boxes work with the new connectors. I'm totally with you on the CAT 5 stuff.

Also, I'm about to replace the cables on my 19a18s and the new connectors on yours sound cool. Is that a part that you found or did you have them machined for those mics? Would they fit in a 19a13 as well?

Chris Garges
Charlotte, NC

A friend machined them up for us. PM me if you need more info. The part won't work with the 19-13s unfortunately.

Greg Norman FG

greg_Archive

GReg-Electrical Tech Journal

402 by greg_Archive

Dumb day.
Problem-
Ashley Gate Channel 1 Key input is killing signal from 24 track.[/color]

Solution-
Inspected, cleaned and reinserted unbalanced 1/4" connector. Everything works now. WTF. Double checked functions and different signal chains with no problem. I hate that.

Problem-
Drawmer DS201 Left input key nonfunctioning.

Solution-
Key inputs mistakenly swapped between channel 1 and 2

Greg Norman FG

r0ck1r0ck2_Archive

GReg-Electrical Tech Journal

403 by r0ck1r0ck2_Archive

you're like those white coat lab guys at emi.

i think you should have to do all the patching as well.

for safety.

greg_Archive

GReg-Electrical Tech Journal

404 by greg_Archive

12/5/7
Neotek Series II-
Replaced "Monitor" fader on channels 3 through 20. 1 through 20 are done now.

Greg Norman FG

nick92675_Archive

GReg-Electrical Tech Journal

405 by nick92675_Archive

greg wrote:12/5/7
Neotek Series II-
Replaced "Monitor" fader on channels 3 through 20. 1 through 20 are done now.

which ones - the "monitor" fader as the console is originally designed [the rotary fader/pots], or the long throw ones that act more like monitor faders after your modifications?

post honeymoon | bang! bang! | new black

greg_Archive

GReg-Electrical Tech Journal

407 by greg_Archive

Hunted down some molex/amp/tyco connectors for the Studer 820s. Some of the power supply connections have overheated recently.

Greg Norman FG

greg_Archive

GReg-Electrical Tech Journal

408 by greg_Archive

12/7/7
Replaced "monitor" pot on the rest of the Neotek Series II channels, then checked out the board for problems. Usually something is wrong after removing then reinstalling all the channels. The connections at the mother board can be temperamental.

Greg Norman FG

greg_Archive

GReg-Electrical Tech Journal

409 by greg_Archive

Mounted and adjusted 2" 8-track headblock on our 820 for a session. There was some play on this after-market construction. I'm curious about the session.

Installed new talkback switch in studio b's Neotek Series II.

Greg Norman FG

greg_Archive

GReg-Electrical Tech Journal

410 by greg_Archive

1/9/8
Problem-
Ampeg B15b bass amp crapping out.

Solution-
Replaced intermittent power cable. The amp is now furnished with a polarized power cable with safety ground. I also deactivated the "phase" switch, and parallel AC outlet. Cleaned and ready for action.

Greg Norman FG

Display posts from previous

Sort by