Display posts from previous
Sort by

GEAR HUNT

1 by dontfeartheringo
Got a thing you're looking for? Post it here.

I am on the hunt for a guitar tech work box. I have some work in the coming year on a tour that you will all be sick of hearing about, soon enough.

I will be drum and guitar tech and I will need a work box. I'm not really up for spending $500 for a new one, but if you have one (or have some thoughts about how you'd put one together), I'm interested in talking. Drum tech I can do with my eyes closed, but guitar tech will be a new experience.

To be clear, the guitars will be in their own cases, so I don't need a big rolling coffin, I just need something like this thing:

https://www.circlethreedesigns.com/shop ... -briefcase


But probably not that over-engineered.
Last edited by dontfeartheringo on Mon Nov 01, 2021 12:22 pm, edited 1 time in total.
tbone wrote: Sun Dec 10, 2023 11:58 pm I imagine at some point as a practicality we will all start assuming that this is probably the last thing we gotta mail to some asshole.

Re: GEAR HUNT

4 by AstroRoadie
Ultracase makes one similar to the Three circle design case but a little cheaper at $440. There is a bare bones one on Reverb for $300+shipping.

https://reverb.com/item/40891677-tour-s ... e-tech-box

Those cases are really small though, too small in my opinion. You'll more than likely need another peli case for strings, gaff and cleaners.

Swan used to make one that was slightly larger that I purchased 4yrs ago for £175. It's not marine ply so maybe not as robust but it's a lot lighter and I've taken it around the world so sturdy enough I think. It's deep enough for Gaff, Orange Micro amp, cleaners, tools and plenty of strings. The leopard print was a home job.

I've seen them on occasion on eBay so maybe setup a search for 'guitar tech case'.
IMG_2888.jpeg
IMG_2888.jpeg (52.86 KiB) Viewed 2306 times
IMG_2887.jpeg
IMG_2887.jpeg (52.35 KiB) Viewed 2306 times

Re: GEAR HUNT

5 by tommy
bishopdante wrote: Fri Nov 05, 2021 2:08 am Something properly engineered that fits into a guitar case to support the neck, that folds up or packs flat, could be good.

Could even build the pop-up neck support tower into a guitar hard case... like a fur-covered flap... possibly concealing some storage for a few sets of strings... now there's a thought...
This is actually a great idea. Find a case that isn't super form fitting so any guitar can fit in, and then modify it to make the lid removable. Place on top of a sturdy keyboard stand and you have a makeshift table at a nice height. Since it's not carrying a guitar, you can also remove all of the foam out of the lid (if there is any) and bolt storage solutions onto into for organizing all of your parts/tools.
self: https://tommiles.bandcamp.com/
old: https://shiiin.bandcamp.com/

Re: GEAR HUNT

6 by Dr Tony Balls
tommy wrote: Mon Nov 08, 2021 9:48 am
bishopdante wrote: Fri Nov 05, 2021 2:08 am Something properly engineered that fits into a guitar case to support the neck, that folds up or packs flat, could be good.

Could even build the pop-up neck support tower into a guitar hard case... like a fur-covered flap... possibly concealing some storage for a few sets of strings... now there's a thought...
This is actually a great idea. Find a case that isn't super form fitting so any guitar can fit in, and then modify it to make the lid removable. Place on top of a sturdy keyboard stand and you have a makeshift table at a nice height. Since it's not carrying a guitar, you can also remove all of the foam out of the lid (if there is any) and bolt storage solutions onto into for organizing all of your parts/tools.
I'd be inclined to leave the lid in place and just add some lightweight lid-support hinges. That way it doesnt come flopping down on you. Remove foam from the top and you can mount all kinds of stuff to the lid that turns into a back wall when you're using the thing. Mounting a tuner to the lid seems like a no-brainer.
Website: http://ballseffects.com/
Instagram: https://www.instagram.com/thetonyballs/

Re: GEAR HUNT

7 by dontfeartheringo
AstroRoadie wrote: Sat Nov 06, 2021 12:42 pm Ultracase makes one similar to the Three circle design case but a little cheaper at $440. There is a bare bones one on Reverb for $300+shipping.

https://reverb.com/item/40891677-tour-s ... e-tech-box

Those cases are really small though, too small in my opinion. You'll more than likely need another peli case for strings, gaff and cleaners.

Swan used to make one that was slightly larger that I purchased 4yrs ago for £175. It's not marine ply so maybe not as robust but it's a lot lighter and I've taken it around the world so sturdy enough I think. It's deep enough for Gaff, Orange Micro amp, cleaners, tools and plenty of strings. The leopard print was a home job.

I've seen them on occasion on eBay so maybe setup a search for 'guitar tech case'.

IMG_2888.jpeg
IMG_2887.jpeg
Dang, that thing is GORGEOUS!

Thanks for the tips! I'm gonna have a look at these!
tbone wrote: Sun Dec 10, 2023 11:58 pm I imagine at some point as a practicality we will all start assuming that this is probably the last thing we gotta mail to some asshole.

Re: GEAR HUNT

8 by brownreasontolive
I'm after all kinds of odd little things. I'll post as I think of them, but first thing that comes to mind:
Image
4 or 5 years ago I got one of these for $30, in the box with manual, warranty card, receipts etc...
Doesn't sound quite like a Dyna-Mite, or the old Gain Brain, but its fast and sounds damn good.

Would very much like to make a pair.
DIY and die anyway.

Re: GEAR HUNT

9 by The Yeoman Ghost
Bartell XK-12.

https://www.pulsebeatguitars.com/html/1 ... artell.php

Apparently there was also a hollow-body or semi-hollow version, which also looks to be rad.

https://reverb.com/item/924551-bartell- ... -with-case

I’ve been conducting weekly internet searches for maybe a year now, and so far have seen only one in the wild. (And it’s black—maybe the only color that could possibly not interest me—and pricy. If it were only one, I could probably overlook the other.)

https://www.californiavintageguitaranda ... ring-black

At any rate, it’s the white whale I will continue to chase. (Unless, y’know, someone happens to have one lying around, or something….)
Tone attorney formerly known as Tom Lael is Dogs.
Post Reply

Return to “Tech Room”

Who is online

Users browsing this forum: No registered users and 0 guests