Display posts from previous
Sort by

Re: A Few New Projects

161 by c jury
Appreciated, sir.

Weekly progress: finished shaping the body and am about 1/2 way through the finishing process- sticking w/ this look, since I have a bunch of birch and walnut, and sticking with the tru-oil finish, cause it's easy.

I also sanded the neck to #2000, then polished. Not quite a mirror finish, but getting close.

#1 mk II should be done by the end of the week. All materials have arrived for #3. If all goes to plan #3 will be the last done entirely by hand.
Attachments
DSC05860.JPG
DSC05860.JPG (185.25 KiB) Viewed 444 times
DSC05861.JPG
DSC05861.JPG (161.62 KiB) Viewed 444 times

Re: A Few New Projects

162 by c jury
Mid-week update: Got a lot of the assembly finished. Just gonna stop by the shop to grab a barrel style jack and the hardware store for a few more short screws.

And just had the greatest windfall of all time. Dude on CL had 1 large (50x24) and one small (24 x 26) plate of .625" 6061 T6 aluminum. I got them for about the price I would have paid for 2 billets- but should be enough for 5 neck-thru builds and 4-5 bolt on necks.

will let you know how that all comes along.

Re: A Few New Projects

163 by c jury
Wrapped up #1.1. ended up at 8lbs, super comfy with some deep 70's arm and belly cuts. Alnico 7.8 and 8.5k pickups. Probably not everyone's cup of tea, but the patriot shape will always be a favorite for me.

Time to start on #3, which will likely be a double-cut tele, just cause.
Attachments
DSC05978.JPG
DSC05978.JPG (176.15 KiB) Viewed 356 times
DSC05977.JPG
DSC05977.JPG (150.38 KiB) Viewed 356 times
DSC05976.JPG
DSC05976.JPG (187.01 KiB) Viewed 356 times

Re: A Few New Projects

167 by c jury
Dudley wrote: Mon May 30, 2022 5:36 am
c jury wrote: Sun May 29, 2022 10:59 pm glamour shot. I really do need to do some fancy photography at some point, rather than just plopping these things down on the rug in my kitchen.
Wow. That's quite the thing, Chris. Great work, sir.

How much does it weigh with everything on?
8lbs 1oz

Re: A Few New Projects

168 by c jury
Weekly update- I got a good start on #3. I think things move more quickly with a little experience.
-body is the same birch/walnut with poplar back- double cut tele sort of look. got it glued up and rough cut
-templates: trying to spend more time setting myself up for some repeatability. Cut to rough shape, use templates and pattern following bits to get to a clean final shape.
-neck is rough cut. working with a 1/2" billet- the thinnest so far. Even with a 5/8, the last one had a baseball bat profile- hoping this will be more '70s fender' size.
Attachments
DSC06027.JPG
DSC06027.JPG (132.96 KiB) Viewed 250 times
DSC06025.JPG
DSC06025.JPG (133 KiB) Viewed 250 times
DSC06026.JPG
DSC06026.JPG (158.44 KiB) Viewed 250 times

Re: A Few New Projects

169 by c jury
c jury wrote: Sun Jun 05, 2022 8:41 pm Weekly update- I got a good start on #3. I think things move more quickly with a little experience.
-body is the same birch/walnut with poplar back- double cut tele sort of look. got it glued up and rough cut
-templates: trying to spend more time setting myself up for some repeatability. Cut to rough shape, use templates and pattern following bits to get to a clean final shape.
-neck is rough cut. working with a 1/2" billet- the thinnest so far. Even with a 5/8, the last one had a baseball bat profile- hoping this will be more '70s fender' size.
Oh- and this will likely be the last Walnut/Birch body for a while- I burned through all my stockpiled walnut. Wood prices have gone through the roof, but I got a great deal on some cherry, so we'll see how that works out moving forward.

Re: A Few New Projects

170 by Dr Tony Balls
c jury wrote: Mon Jun 06, 2022 9:37 am
c jury wrote: Sun Jun 05, 2022 8:41 pm Weekly update- I got a good start on #3. I think things move more quickly with a little experience.
-body is the same birch/walnut with poplar back- double cut tele sort of look. got it glued up and rough cut
-templates: trying to spend more time setting myself up for some repeatability. Cut to rough shape, use templates and pattern following bits to get to a clean final shape.
-neck is rough cut. working with a 1/2" billet- the thinnest so far. Even with a 5/8, the last one had a baseball bat profile- hoping this will be more '70s fender' size.
Oh- and this will likely be the last Walnut/Birch body for a while- I burned through all my stockpiled walnut. Wood prices have gone through the roof, but I got a great deal on some cherry, so we'll see how that works out moving forward.
Since everything vibrating is really contained in the neck/bridge block, isnt the functionality of the wood largely superfluous? Obviously it looks nice, but i'd think you could make a perfectly reasonable body out of baltic birch or some other void-free plywood given the kinda neck-through setup.
Website: http://ballseffects.com/
Instagram: https://www.instagram.com/thetonyballs/
Post Reply

Return to “Tech Room”

Who is online

Users browsing this forum: No registered users and 0 guests