Nate Dort wrote:jbar wrote:some tall guy from WashingtonI have a pretty good idea who it was.

an ampeg style ultra low switch would be nice too!

bassdriver wrote:an ampeg style ultra low switch would be nice too!FYI, in case you or anyone else didn't know, the Ultra Low switch is really just a big mid scoop switch that's not dissimilar to the GK contour switch. Ampeg did it first, though.Cheers!

TheMilford wrote:Boombats wrote:TheMilford wrote:Did we miss anything?A bypass output.Just a question, and maybe I should do a poll... but how many folks will actually use a piece of rack gear in bypass mode?Maybe I should clarify: I'm talking about either a "Tuner Out" type of pre-anything output, or alternately a pre/post EQ switch on the DI output.

TheMilford wrote:Did we miss anything?A bypass output.

A two button footswitch hookup with boost on/off and mute on/off would be nifty. = Justin

TheMilford wrote:So far these the features/bells & whistles that should make it onto the rack prototype:INPUT JackINPUT HI/LO toggle switch “ same as HI/LO on Rusty BoxINPUT GAIN “ same as INPUT GAIN knob on Rusty BoxBOOST on/off toggle switchBOOST “ new knob that sets boost gainPassive EQ type toggle switch “ switches the passive EQ between Rusty EQ and Boxidizer EQMID “ same as MID on Rusty BoxBASS “ same as BASS on Rusty BoxTREBLE “ same as TREBLE on Rusty BoxSweepable MID EQ on/off toggle switchMID Frequency knobMID BandwidthMID Boost/Cut knobVOL “ same as VOL on Rusty Box, this is a master volume controlBack I/OInput: 1/4" Instrument (Unbal) “ mirrors input on front panelInput: XLR Balanced (Bal)Output: 1/4" Line (Unbal) “ same as on Rusty BoxOutput: 1/4" Main (Bal/Unbal) “ same as on Rusty BoxOutput: XLR Balanced Main (Bal) “ mirror Main Output Output: XLR Balanced DI (Bal) “ this output is before the master VOL knobControl: 1/4 footswitch for external momentary footswitch control over the Boost function. This jack accepts one footswitch on the TIP.AC Mains Power Connector w/ built-in fuseWe are discussing a possible xformer output option. possible stereo 2U options, etc.Did we miss anything?This sounds like it s going to be killer

TheMilford wrote:So far these the features/bells & whistles that should make it onto the rack prototype:INPUT JackINPUT HI/LO toggle switch “ same as HI/LO on Rusty BoxINPUT GAIN “ same as INPUT GAIN knob on Rusty BoxBOOST on/off toggle switchBOOST “ new knob that sets boost gainPassive EQ type toggle switch “ switches the passive EQ between Rusty EQ and Boxidizer EQMID “ same as MID on Rusty BoxBASS “ same as BASS on Rusty BoxTREBLE “ same as TREBLE on Rusty BoxSweepable MID EQ on/off toggle switchMID Frequency knobMID BandwidthMID Boost/Cut knobVOL “ same as VOL on Rusty Box, this is a master volume controlBack I/OInput: 1/4" Instrument (Unbal) “ mirrors input on front panelInput: XLR Balanced (Bal)Output: 1/4" Line (Unbal) “ same as on Rusty BoxOutput: 1/4" Main (Bal/Unbal) “ same as on Rusty BoxOutput: XLR Balanced Main (Bal) “ mirror Main Output Output: XLR Balanced DI (Bal) “ this output is before the master VOL knobControl: 1/4 footswitch for external momentary footswitch control over the Boost function. This jack accepts one footswitch on the TIP.AC Mains Power Connector w/ built-in fuseWe are discussing a possible xformer output option. possible stereo 2U options, etc.Did we miss anything?This sounds like it s going to be killer

That all looks awesome Milford! Love to see an option to adjust the boost gain on there