So far these the features/bells & whistles that should make it onto the rack prototype:INPUT JackINPUT HI/LO toggle switch “ same as HI/LO on Rusty BoxINPUT GAIN “ same as INPUT GAIN knob on Rusty BoxBOOST on/off toggle switchBOOST “ new knob that sets boost gainPassive EQ type toggle switch “ switches the passive EQ between Rusty EQ and Boxidizer EQMID “ same as MID on Rusty BoxBASS “ same as BASS on Rusty BoxTREBLE “ same as TREBLE on Rusty BoxSweepable MID EQ on/off toggle switchMID Frequency knobMID BandwidthMID Boost/Cut knobVOL “ same as VOL on Rusty Box, this is a master volume controlBack I/OInput: 1/4" Instrument (Unbal) “ mirrors input on front panelInput: XLR Balanced (Bal)Output: 1/4" Line (Unbal) “ same as on Rusty BoxOutput: 1/4" Main (Bal/Unbal) “ same as on Rusty BoxOutput: XLR Balanced Main (Bal) “ mirror Main Output Output: XLR Balanced DI (Bal) “ this output is before the master VOL knobControl: 1/4 footswitch for external momentary footswitch control over the Boost function. This jack accepts one footswitch on the TIP.AC Mains Power Connector w/ built-in fuseWe are discussing a possible xformer output option. possible stereo 2U options, etc.Did we miss anything?

Justin Foley wrote:A two button footswitch hookup with boost on/off and mute on/off would be nifty. = JustinHow about a bypass switch like the og? So boost/bypass? I guess mute would be easy to add.

Boombats wrote:TheMilford wrote:Did we miss anything?A bypass output.Just a question, and maybe I should do a poll... but how many folks will actually use a piece of rack gear in bypass mode?

tallchris wrote:That all looks awesome Milford! Love to see an option to adjust the boost gain on there hands-down the most requested feature. It will absolutely have a boost level control.

new poll:viewtopic.php?f=5&t=68950

TheMilford wrote:Justin Foley wrote:A two button footswitch hookup with boost on/off and mute on/off would be nifty. = JustinHow about a bypass switch like the og? So boost/bypass? I guess mute would be easy to add.I'm a little confused with the threads here, but something on a footswitch that kills all output sound when you step on it, and then reopens when you step on it again. Primarily useful for playing live and have some gain on the signal.= Justin

I'll be recording an album starting tomorrow with this rig:The Rusty is simply amazing, especially with the new DR Hi-beams on the EGC.Close-up of the board:

That is a sick board. Just the front row alone is not fucking around.

Verbs & Nouns wrote:So you re going straight from the Rusty Box into a power amp?Yup!

Tommy wrote:Your A/DA Flanger settings are almost identical to mine (minus the enhance knob)...Sweet board. I have the Particle, but how's that Context?Actually I wasn't planning on placing it on this board initially, but ended up liking it a lot. I use it to tame feedback when making noise as well as emulating guitar sounds higher up the neck. Also pairs really well with the Matryoshka.Really want to get a Particle V2 at some point.I generally keep the resonance on the A/DA a bit lower, but I chose a more extreme setting for the recording since I'll be mixing the flanged signal with the dry.