Page 19 of 23

Dietz Cabinets.

Posted: Thu Aug 14, 2008 3:09 pm
by chris jury_Archive
Eliya-

I would recommend installing the screws for the cleats from the inside. that way you don't have to fuss with measuring and getting your screw spacing even...you can just throw them in quickly. Glue is also important...don't forget the glue for those cleats.

Dietz Cabinets.

Posted: Thu Aug 14, 2008 3:13 pm
by eliya_Archive
chris jury wrote:Eliya-

I would recommend installing the screws for the cleats from the inside. that way you don't have to fuss with measuring and getting your screw spacing even...you can just throw them in quickly. Glue is also important...don't forget the glue for those cleats.


thans Chris!

So you put some glue on the cleats, put them on the surface, let it dry and put the screws in?

Dietz Cabinets.

Posted: Thu Aug 14, 2008 3:50 pm
by chris jury_Archive
To get a strong bond, I would put in the screws immediately. They act like a clamp. And be sure to glue every surface that is contacting another, like the back of a cleat where it touches another cleat. it just really tightens everything up and prevents rattles years down the road, when a mechanical fastener (like a nail or screw) might wiggle loose.

Dietz Cabinets.

Posted: Thu Aug 14, 2008 4:14 pm
by andysjunkymusic_Archive
score of the day for me...I just got a mesa 1x15...the EV design one loaded with the original EV speaker for $150!! Im so excited to get this thing!

Dietz Cabinets.

Posted: Thu Aug 14, 2008 10:36 pm
by TheMilford_Archive
chris jury wrote:To get a strong bond, I would put in the screws immediately. They act like a clamp. And be sure to glue every surface that is contacting another, like the back of a cleat where it touches another cleat. it just really tightens everything up and prevents rattles years down the road, when a mechanical fastener (like a nail or screw) might wiggle loose.


This is correct. You use the screws as a sort of clamp. But I would actually take the screws out after the glue dries... they can pop, squeak, and rattle. The glue joint will suffice... it should actually be stronger than the wood itself. Also, remember to drill pilot holes in the cleats so when screwed the pieces are drawn together.

Dietz Cabinets.

Posted: Wed Aug 31, 2016 7:00 pm
by OneFiveFour_Archive
For recording, especially more 'pop' bass lines, it can work well. For going to Doom Town, not so much.

Dietz Cabinets.

Posted: Wed Aug 31, 2016 7:00 pm
by OneFiveFour_Archive
Emperor makes plenty of doomworthy 15/12 combinations, and I'm sure a tower of EVM-12Ls could sound massive. I was just speaking of playing through a single TL806 though.

Dietz Cabinets.

Posted: Wed Aug 31, 2016 7:00 pm
by Adam P_Archive
I really like my old Ampeg V4 4x12 for bass on the 100w side of my 800RB. If I had ~$500 to spend on new speakers (or if anyone here is an Eminence dealer and wants to hook me up...) I'd probably like it even more.

Dietz Cabinets.

Posted: Wed Aug 31, 2016 7:00 pm
by benadrian_Archive
twelvepoint wrote:It seems weird because 15"s and 10"s are both used for huge bass sounds, yet you don't see bass Rigs of Doom with 12s. Wonder why that isLike other people have said, it's mainly about design. Bass cabs use speakers designed for bass frequencies and bass guitars. Bass cabs with 10s and 15s don't use 10s and 15s made for guitar. Plus, the enclosures are designed for the best handling of bass frequencies.There are some bass cabs with 12s, and well designed cabs with appropriate speakers sound very good. However, these 12" bass cabs also don't sound like classic guitar cabs when used with guitar.

Dietz Cabinets.

Posted: Wed Aug 31, 2016 7:00 pm
by benadrian_Archive
Oh yeah, I just remembered that Trans Am plays both guitar and bass through their half stacks. Not a modern bass tone, but it works for them and has its own distinctive vibe.