Yeah, it's going to work a lot better to use a DI to Mic Level and use the mic pre at the console or PA to bring it to Line level. There is a radial box that takes instrument level to line level, but I don't really understand why it exists. If you really want line level, I suggest hitting a DI and then taking that into a small cheap mic pre like a MAudio Audio buddy or something like that. Or, just hitting any mic pre with an instrument level input.
Here you go. This can do it twice for $30
https://www.ebay.com/itm/265238383089?h ... Sw1ZFg-KxS
Re: Small questions that don't fit anywhere
172This!! And if you are using a large diaphragm condenser the back it off at least two feetlosthighway wrote: Sat Jul 24, 2021 7:36 amExperiment with mic placement and mic choice, a lot. One position that seems to tame boom and mush is to have the mic a little higher than the strings and then looking down at them. Somewhere around the neck joint/12th fret is usually a good starting place for the horizontal axisthelastrewind wrote: Sat Jul 24, 2021 7:09 am Recording tips for recording baritone acoustics. I know I need to learn to play a little differently, but I'm sounding a bit flabby on the low end, mushy and bassy. Any tips?
"lol, listen to op 'music' and you'll understand"....
https://sebastiansequoiah-grayson.bandcamp.com/
https://oblier.bandcamp.com/releases
https://youtube.com/user/sebbityseb
https://sebastiansequoiah-grayson.bandcamp.com/
https://oblier.bandcamp.com/releases
https://youtube.com/user/sebbityseb
Re: Small questions that don't fit anywhere
173I am obviously far from an expert, but when I record cello I blend in a contact mic for clarity. I don't have a fancy one, but even with a cheap one it gives some focus.thelastrewind wrote: Sat Jul 24, 2021 7:09 am Recording tips for recording baritone acoustics. I know I need to learn to play a little differently, but I'm sounding a bit flabby on the low end, mushy and bassy. Any tips?
Re: Small questions that don't fit anywhere
174Why do people put Bigsbys on Jazzmasters?
Band: https://cushingsound.bandcamp.com/music
Building Pedals: https://www.instagram.com/bttrnx_america/
Building Pedals: https://www.instagram.com/bttrnx_america/
Re: Small questions that don't fit anywhere
175New (to me) guitar arrives with 10s.
Take strings off and leave off for 2 or 3 days while I monkey with other modifications.
String guitar with 11s.
Neck relief is all to shit! Totally flat with no bow in it at all even with heavier strings. All buzzy near the nut.
Why?
Take strings off and leave off for 2 or 3 days while I monkey with other modifications.
String guitar with 11s.
Neck relief is all to shit! Totally flat with no bow in it at all even with heavier strings. All buzzy near the nut.
Why?
Re: Small questions that don't fit anywhere
176How long have you waited since restringing?
Humidity?
It has been super muggy here. All my stuff was acting crazy this summer. Drifting out of tune, fret buzz. Couldn't play my Wurlitzer as all of the keys had swelled and were sticking. Bought a dehumidifier and everything is stable now.
Humidity?
It has been super muggy here. All my stuff was acting crazy this summer. Drifting out of tune, fret buzz. Couldn't play my Wurlitzer as all of the keys had swelled and were sticking. Bought a dehumidifier and everything is stable now.
Re: Small questions that don't fit anywhere
177Yeah, it has been hot and wet here. Didn't expect such a big movement in 3 days. Bummer. I hate adjusting truss rods.Nate Dort wrote: Tue Jul 27, 2021 7:55 am How long have you waited since restringing?
Humidity?
It has been super muggy here. All my stuff was acting crazy this summer. Drifting out of tune, fret buzz. Couldn't play my Wurlitzer as all of the keys had swelled and were sticking. Bought a dehumidifier and everything is stable now.
Re: Small questions that don't fit anywhere
178I feel like this is more of a WTF statement than a question, but I'll attempt to answer.
I think it comes from the trend a while back to use tune-o-matic and stop tailpieces on offset style guitars. A certain type of player really liked that setup.
Now, once you have any guitar with a stop tailpiece, putting a Vibramate kit on it to add a Bigsby is pretty much a piece of cake.
Then Fender released a series of JMs with Bigsbys screwed in. And people bought them! I think a lot of offset fans want to collect a lot of variations.
When it comes to off brands, for a long time a generic Bigsby was easier to find than a generic Jag/Jazz vibrato. So when a cheapo company was trying to recreate the feel of an offset guitar, they just clamped on a no name bigsby vibrato because it was the cheapest vibrato option.
that's my $0.02
Re: Small questions that don't fit anywhere
179I avoided it like the plague until I had a luthier out of commission with an illness and an extra 30 minutes in the jam space. It's really not so bad. I always have to check the online pictures to remember which direction does what, but they're totally helpful. Making small moves and then playing a while got me somewhere I'd call better in a relatively low-stress way.Adam_I_III wrote: Tue Jul 27, 2021 9:14 am Yeah, it has been hot and wet here. Didn't expect such a big movement in 3 days. Bummer. I hate adjusting truss rods.
My pickup install might be a different journey.
Re: Small questions that don't fit anywhere
180Fair enough, it just blew my mind that Fender made one.benadrian wrote: Tue Jul 27, 2021 12:15 pmI feel like this is more of a WTF statement than a question, but I'll attempt to answer.
I think it comes from the trend a while back to use tune-o-matic and stop tailpieces on offset style guitars. A certain type of player really liked that setup.
Now, once you have any guitar with a stop tailpiece, putting a Vibramate kit on it to add a Bigsby is pretty much a piece of cake.
Then Fender released a series of JMs with Bigsbys screwed in. And people bought them! I think a lot of offset fans want to collect a lot of variations.
When it comes to off brands, for a long time a generic Bigsby was easier to find than a generic Jag/Jazz vibrato. So when a cheapo company was trying to recreate the feel of an offset guitar, they just clamped on a no name bigsby vibrato because it was the cheapest vibrato option.
that's my $0.02
Band: https://cushingsound.bandcamp.com/music
Building Pedals: https://www.instagram.com/bttrnx_america/
Building Pedals: https://www.instagram.com/bttrnx_america/